Below are the results of the testsuite for gpc-20021128 with gcc-3.2.1 on Mac OS X.2.3 (Darwin 6.3).
I can send in more information as needed.
Regards,
Adriaan van Os
P.S. Same results with -gstabs
--------------
[G4:~] adriaan% gpc -v Reading specs from /usr/local/gpc321d3/lib/gcc-lib/powerpc-apple-darwin6.3/3.2.1/specs Configured with: ../gpc-3.2.1/configure --enable-languages=c,pascal --prefix=/usr/local/gpc321d3 Thread model: single gpc version 20021128, based on gcc-3.2.1 [G4:~] adriaan% cd ~/gnu/testgpc/test [G4:~/gnu/testgpc/test] adriaan% make
Running the GPC Test Suite. This may take a while ...
rm -f *.dat *.o *.s *.gpm *.gpi *.gpd *.gpc core a.out stderr.out *.exe testmake.tmp dummy.c dummy.pas dummy.out diff_cr*.tmp fixcr fixcr.exe rm -f todo/a.out todo/*.exe todo/*.o todo/*.s todo/*.gpm todo/*.gpi todo/*.gpd todo/core { gpc --version | head -1; gpc --print-search-dirs | grep install | head -1; hostname || echo "unknown host"; } | \ sed -e 's,^,Testing ,;N;s,\n.*gcc-lib[/], (,;s,[/].*,),;N;s,\n, (,;s,$,),' Testing gpc 20021128, based on gcc-3.2.1 (powerpc-apple-darwin6.3) (G4.local.) echo "gpc -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused " gpc -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused PC="gpc" PFLAGS="--autobuild -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused " SRCDIR="." TEST_MAKE_FLAG=test-make-flag "./test_run" "*.pas" | "./test_sum" TEST agettext2test.pas: SKIPPED: libintl not installed TEST asmtest.pas: SKIPPED: only for IA32 TEST asmtest2.pas: SKIPPED: only for IA32 TEST asmtest3.pas: SKIPPED: only for IA32 TEST backtracerr.pas: 2c2,71 < ./test_run: line 188: 22183 Segmentation fault ./"$A_OUT" "$x" ---
b: about to b(c) b: about to b(c) b: about to b(c) b: about to b(c) b: about to b(c) b: about to b(c) b: about to b(c) b: about to b(c) b: about to b(c) b: about to b(c) b: about to b(c) b: about to yy c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx() c: about to a(yy) a: about to xx()d: a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) a: back from xx() c: back from a(yy) b: back from yy b: back from b(c) b: back from b(c) b: back from b(c) b: back from b(c) b: back from b(c) b: back from b(c) b: back from b(c) b: back from b(c) b: back from b(c) b: back from b(c) b: back from b(c) program: back from b( d )
failed TEST bill5.pas: SKIPPED: `attribute( section(".ltext") )' not available TEST dario.pas: SKIPPED: only for IA32 TEST fay.pas: 1c1,12 < ./test_run: line 188: 28960 Segmentation fault ./"$A_OUT" "$x" ---
stacking 1 Doing successors of 1 stacking 2 Doing successors of 2 Now checking if 2 is an SCC root Now checking if 1 is an SCC root 1 is an SCC root; SP= 2 T= 1 Yield SCC should pass 1 out to TakeUSCC YieldUSCC passes 1 to TakeUSCC TakeUSCC receives V= 1 from YieldUSCC The SCC's constituents are: 2 1
failed TEST fjf165a.pas: SKIPPED: German locale not installed TEST fjf35.pas: ./test_run: line 199: 7712 Segmentation fault ./"$A_OUT" "$x" TEST fjf434a.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST fjf434ax.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST fjf464c.pas: ./test_run: line 199: 13383 Segmentation fault ./"$A_OUT" "$x" TEST fjf464e.pas: ./test_run: line 199: 13441 Segmentation fault ./"$A_OUT" "$x" TEST fjf480a.pas: SKIPPED: librx not installed TEST fjf480b.pas: SKIPPED: librx not installed TEST fjf480c.pas: SKIPPED: librx not installed TEST fjf558m.pas: O./test_run: line 199: 23669 Bus error ./"$A_OUT" "$x" TEST fjf558n.pas: O./test_run: line 199: 23691 Bus error ./"$A_OUT" "$x" TEST fjf56.pas: SKIPPED: only for IA32 TEST fjf582.pas: ./test_run: line 199: 26315 Segmentation fault ./"$A_OUT" "$x" TEST fjf664.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST fjf77.pas: SKIPPED: range of LongReal not sufficient for test TEST fjf92.pas: SKIPPED: only for IA32 TEST fproc.pas: 4c4,11 < ./test_run: line 188: 5375 Segmentation fault ./"$A_OUT" "$x" ---
Stack frame: 0 formal print = 4 formal routine = 4 Stack frame: 1 formal print = 4 formal routine = 4 Stack frame: 2 formal print = 4 formal routine = 4 Stack frame: 3 formal print = 4 formal routine = 4 Stack frame: 4 formal print = non-local jump Stack frame: 8 formal print = -1 formal routine = -1 Stack frame: 9 formal print = -1 formal routine = -1 Stack frame: 10 formal print = -1 formal routine = -1
failed TEST gettexttest.pas: SKIPPED: libintl not installed TEST gmptest.pas: SKIPPED: libgmp not installed TEST goto4.pas: O./test_run: line 199: 5666 Bus error ./"$A_OUT" "$x" TEST goto5.pas: O./test_run: line 199: 5688 Bus error ./"$A_OUT" "$x" TEST heapmo2.pas: OK ./test_run: line 199: 6054 Bus error ./"$A_OUT" "$x" TEST heapmontest.pas: OK ./test_run: line 199: 6086 Segmentation fault ./"$A_OUT" "$x" TEST jj5.pas: SKIPPED: `attribute (stdcall)' not available TEST knuth1.pas: ./test_run: line 199: 7349 Segmentation fault ./"$A_OUT" "$x" TEST longr2.pas: SKIPPED: no LongReal math routines available TEST math.pas: 2d1 < ./test_run: line 188: 8385 Segmentation fault ./"$A_OUT" "$x" failed TEST nlgpp.pas: ./test_run: line 199: 10696 Segmentation fault ./"$A_OUT" "$x" TEST nlgpp2.pas: 2c2,30 < ./test_run: line 188: 10718 Segmentation fault ./"$A_OUT" "$x" ---
Recursive start 10 True Recursive start 9 True Recursive start 8 True Recursive start 7 True Recursive start 6 True Recursive start 5 True Recursive start 4 True Recursive start 3 True Recursive start 2 False Recursive start 1 False Recursive start 0 False DoGoto 3 True OK Recursive end 3 True Recursive before goto 4 True Recursive end 4 True Recursive before goto 5 True Recursive end 5 True Recursive before goto 6 True Recursive end 6 True Recursive before goto 7 True Recursive end 7 True Recursive before goto 8 True Recursive end 8 True Recursive before goto 9 True Recursive end 9 True Recursive before goto 10 True Recursive end 10 True Main end
failed TEST nonlocgoto.pas: 3c3 < ./test_run: line 188: 10852 Bus error ./"$A_OUT" "$x" ---
it worked
failed TEST readb1.pas: ./test_run: line 199: 12272 Segmentation fault ./"$A_OUT" "$x" TEST readb10.pas: ./test_run: line 199: 12299 Segmentation fault ./"$A_OUT" "$x" TEST readb11.pas: ./test_run: line 199: 12326 Segmentation fault ./"$A_OUT" "$x" TEST readb12.pas: ./test_run: line 199: 12353 Segmentation fault ./"$A_OUT" "$x" TEST readb13.pas: ./test_run: line 199: 12380 Segmentation fault ./"$A_OUT" "$x" TEST readb2.pas: ./test_run: line 199: 12482 Segmentation fault ./"$A_OUT" "$x" TEST readb3.pas: ./test_run: line 199: 12509 Segmentation fault ./"$A_OUT" "$x" TEST readb4.pas: ./test_run: line 199: 12536 Segmentation fault ./"$A_OUT" "$x" TEST readb5.pas: ./test_run: line 199: 12563 Segmentation fault ./"$A_OUT" "$x" TEST readb6.pas: ./test_run: line 199: 12590 Segmentation fault ./"$A_OUT" "$x" TEST readb7.pas: ./test_run: line 199: 12617 Segmentation fault ./"$A_OUT" "$x" TEST readb8.pas: ./test_run: line 199: 12644 Segmentation fault ./"$A_OUT" "$x" TEST readb9.pas: ./test_run: line 199: 12671 Segmentation fault ./"$A_OUT" "$x" TEST reade1.pas: ./test_run: line 199: 13098 Segmentation fault ./"$A_OUT" "$x" TEST reade10.pas: ./test_run: line 199: 13125 Segmentation fault ./"$A_OUT" "$x" TEST reade11.pas: ./test_run: line 199: 13153 Segmentation fault ./"$A_OUT" "$x" TEST reade12.pas: ./test_run: line 199: 13181 Segmentation fault ./"$A_OUT" "$x" TEST reade13.pas: ./test_run: line 199: 13208 Segmentation fault ./"$A_OUT" "$x" TEST reade15.pas: ./test_run: line 199: 13260 Segmentation fault ./"$A_OUT" "$x" TEST reade2.pas: ./test_run: line 199: 13312 Segmentation fault ./"$A_OUT" "$x" TEST reade3.pas: ./test_run: line 199: 13339 Segmentation fault ./"$A_OUT" "$x" TEST reade4.pas: ./test_run: line 199: 13366 Segmentation fault ./"$A_OUT" "$x" TEST reade5.pas: ./test_run: line 199: 13393 Segmentation fault ./"$A_OUT" "$x" TEST reade6.pas: ./test_run: line 199: 13420 Segmentation fault ./"$A_OUT" "$x" TEST reade7.pas: ./test_run: line 199: 13447 Segmentation fault ./"$A_OUT" "$x" TEST reade8.pas: ./test_run: line 199: 13474 Segmentation fault ./"$A_OUT" "$x" TEST reade9.pas: ./test_run: line 199: 13501 Segmentation fault ./"$A_OUT" "$x" TEST readg1.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST readg10.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST readg11.pas: ./test_run: line 199: 13572 Segmentation fault ./"$A_OUT" "$x" TEST readg12.pas: ./test_run: line 199: 13599 Segmentation fault ./"$A_OUT" "$x" TEST readg13.pas: ./test_run: line 199: 13626 Segmentation fault ./"$A_OUT" "$x" TEST readg15.pas: ./test_run: line 199: 13678 Segmentation fault ./"$A_OUT" "$x" TEST readg2.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST readg3.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST readg4.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST readg5.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST readg6.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST readg7.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST readg8.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST readg9.pas: gpc: Internal error: Illegal instruction (program gpc1) Please submit a full bug report to gpc@gnu.de. failed TEST regextest.pas: SKIPPED: librx not installed TEST systemtest.pas: Error in HeapError #2 TEST t6334-2.pas: ./test_run: line 199: 17360 Illegal instruction ./"$A_OUT" "$x" TEST t6p6p3p4.pas: ./test_run: line 199: 17382 Bus error ./"$A_OUT" "$x" TEST trap2test.pas: ./test_run: line 199: 17848 Segmentation fault ./"$A_OUT" "$x" TEST traptest.pas: ./test_run: line 199: 17884 Segmentation fault ./"$A_OUT" "$x"
# of GPC tests 2857 # of GPC tests passed 2772 # of GPC tests skipped 18 # of GPC tests failed 67
Adriaan van Os wrote:
Below are the results of the testsuite for gpc-20021128 with gcc-3.2.1 on Mac OS X.2.3 (Darwin 6.3).
I can send in more information as needed.
Apparently there are bugs with nonlocal gotos (this also happens on Linux/S390) and trampolines (I've seen this reported on Solaris, but I think only with earlier GCC versions).
Both seem to be backend-bugs (maybe fixed in the patches), and can probably reproduced in C if that helps the backend people to fix them ...
About the other bugs, someone might have to do some more debugging ...
P.S. Same results with -gstabs
Just to be sure, did you write `EXTRA_TEST_PFLAGS=-gstabs' (not CFLAGS or so)? Did you also try with `-g0'?
Frank
Frank Heckenbach wrote:
Adriaan van Os wrote:
Below are the results of the testsuite for gpc-20021128 with gcc-3.2.1 on Mac OS X.2.3 (Darwin 6.3).
I can send in more information as needed.
Apparently there are bugs with nonlocal gotos (this also happens on Linux/S390) and trampolines (I've seen this reported on Solaris, but I think only with earlier GCC versions).
The Ada for Mac OS X project has a trampoline patch to libgcc.a. It fixes 12 out of 66 testsuite failures. I will post the source code of the patch, as soon as I have it.
Both seem to be backend-bugs (maybe fixed in the patches), and can probably reproduced in C if that helps the backend people to fix them ...
About the other bugs, someone might have to do some more debugging
Backtraces are at the bottom of this messages. It seems that Mac OS X doesn't like Mr. "R" ....
P.S. Same results with -gstabs
Just to be sure, did you write `EXTRA_TEST_PFLAGS=-gstabs' (not CFLAGS or so)? ....
This is what I did ....
[G4:~/gnu/testgpc/test] adriaan% make EXTRA_TEST_PFLAGS=-gstabs
Running the GPC Test Suite. This may take a while ...
rm -f *.dat *.o *.s *.gpm *.gpi *.gpd *.gpc core a.out stderr.out *.exe testmake.tmp dummy.c dummy.pas dummy.out diff_cr*.tmp fixcr fixcr.exe rm -f todo/a.out todo/*.exe todo/*.o todo/*.s todo/*.gpm todo/*.gpi todo/*.gpd todo/core { gpc --version | head -1; gpc --print-search-dirs | grep install | head -1; hostname || echo "unknown host"; } | \ sed -e 's,^,Testing ,;N;s,\n.*gcc-lib[/], (,;s,[/].*,),;N;s,\n, (,;s,$,),' Testing gpc 20021128, based on gcc-3.2.1 (powerpc-apple-darwin6.0) (G4.local.) echo "gpc -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused -gstabs" gpc -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused -gstabs PC="gpc" PFLAGS="--autobuild -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused -gstabs" SRCDIR="." TEST_MAKE_FLAG=test-make-flag "./test_run" "*.pas" | "./test_sum"
... Did you also try with `-g0'?
And this is what I did also ....
[G4:~/gnu/testgpc/test] adriaan% make EXTRA_TEST_PFLAGS=-g0
Running the GPC Test Suite. This may take a while ...
rm -f *.dat *.o *.s *.gpm *.gpi *.gpd *.gpc core a.out stderr.out *.exe testmake.tmp dummy.c dummy.pas dummy.out diff_cr*.tmp fixcr fixcr.exe rm -f todo/a.out todo/*.exe todo/*.o todo/*.s todo/*.gpm todo/*.gpi todo/*.gpd todo/core { gpc --version | head -1; gpc --print-search-dirs | grep install | head -1; hostname || echo "unknown host"; } | \ sed -e 's,^,Testing ,;N;s,\n.*gcc-lib[/], (,;s,[/].*,),;N;s,\n, (,;s,$,),' Testing gpc 20021128, based on gcc-3.2.1 (powerpc-apple-darwin6.0) (G4.local.) echo "gpc -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused -g0" gpc -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused -g0 PC="gpc" PFLAGS="--autobuild -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused -g0" SRCDIR="." TEST_MAKE_FLAG=test-make-flag "./test_run" "*.pas" | "./test_sum"
However, Mac OS X crashreporter still gives me backtraces with routine names and line numbers. Is this expected behaviour ?
**********
Date/Time: 2003-01-12 03:13:38 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 13370
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00001a84 srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00001a5c ctr: 0x00001bc8 mq: 0x00000000 r0: 0x00001bc8 r1: 0x00000000 r2: 0x00000000 r3: 0x0002b920 r4: 0x00000000 r5: 0x00001a5c r6: 0x00000000 r7: 0x00000000 r8: 0xbffff8c8 r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000424 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffff928 r30: 0xbffff8a0 r31: 0x00001a28
**********
Date/Time: 2003-01-12 03:13:40 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 13392
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00001a84 srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00001a5c ctr: 0x00001bc8 mq: 0x00000000 r0: 0x00001bc8 r1: 0x00000000 r2: 0x00000000 r3: 0x0002b920 r4: 0x00000000 r5: 0x00001a5c r6: 0x00000000 r7: 0x00000000 r8: 0xbffff8c8 r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000424 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffff928 r30: 0xbffff8a0 r31: 0x00001a28
**********
Date/Time: 2003-01-12 03:15:05 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 16093
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfbefa00
Thread 0 Crashed: #0 0x00001afc in pascal_main_program (crt.c:300) #1 0x00001a2c in _start (crt.c:267) #2 0x000018ac in start
PPC Thread State: srr0: 0x00001afc srr1: 0x0000d030 vrsave: 0x00000000 xer: 0x20000000 lr: 0x00001ae8 ctr: 0x900051a0 mq: 0x00000000 r0: 0x00001c7c r1: 0xbffffa70 r2: 0x00031ae8 r3: 0x00000000 r4: 0xffbeff90 r5: 0xffbe0000 r6: 0x00001cb4 r7: 0x00000000 r8: 0x00038370 r9: 0x00032748 r10: 0x0002b92c r11: 0x00000000 r12: 0x00000000 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb70 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb80 r30: 0xbffffb74 r31: 0x00001ae8
**********
Date/Time: 2003-01-12 03:20:28 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 25025
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0x87859393
Backtrace not available
PPC Thread State: srr0: 0x00002688 srr1: 0x0000d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00002660 ctr: 0x00002920 mq: 0x00000000 r0: 0x00002920 r1: 0x87859393 r2: 0x00000000 r3: 0x0002c928 r4: 0x00042604 r5: 0x00000010 r6: 0x00002660 r7: 0x00000000 r8: 0xbfffef84 r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000001 r14: 0x000026a0 r15: 0x000426a0 r16: 0xbffff003 r17: 0x00000011 r18: 0x00028e94 r19: 0x000226a0 r20: 0x00000003 r21: 0x000226a0 r22: 0x000426a0 r23: 0x00000000 r24: 0x0002c928 r25: 0x000426a0 r26: 0xbffff600 r27: 0x0000000c r28: 0x00000002 r29: 0xbffff5e8 r30: 0xbfffef50 r31: 0x00002604
**********
Date/Time: 2003-01-12 03:20:43 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 25316
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00001a38
Thread 0 Crashed: #0 0x0000c4f0 in _p_write_init (file.c:2618) #1 0x0000de48 in _p_write (rts-va.c:301) #2 0x00001b58 in pascal_main_program (crt.c:300) #3 0x00001cb8 in main (crt.c:300) #4 0x0000197c in _start (crt.c:267) #5 0x000017fc in start
PPC Thread State: srr0: 0x0000c4f0 srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0000c4ac ctr: 0x00001c20 mq: 0x00000000 r0: 0x00004000 r1: 0xbffff8b0 r2: 0x00000000 r3: 0x000001c2 r4: 0x00001a04 r5: 0x00000000 r6: 0x0000000e r7: 0x0000004b r8: 0x00000016 r9: 0x0000001c r10: 0x00041a38 r11: 0x00000000 r12: 0x44000424 r13: 0x00000000 r14: 0x00041a38 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb70 r27: 0x0000000c r28: 0x00000180 r29: 0x00000000 r30: 0x00001a04 r31: 0x0000c4ac
**********
Date/Time: 2003-01-12 03:20:45 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 25338
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00001a74 srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00001a4c ctr: 0x00001bfc mq: 0x00000000 r0: 0x00001bfc r1: 0x00000000 r2: 0x00000000 r3: 0x0002b920 r4: 0x00000000 r5: 0x00001a4c r6: 0x00000000 r7: 0x00000000 r8: 0xbffff8c8 r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000424 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb70 r27: 0x0000000c r28: 0x00000002 r29: 0xbffff928 r30: 0xbffff8a0 r31: 0x00001a18
**********
Date/Time: 2003-01-12 03:22:36 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 28029
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0x0103ccc0
Thread 0 Crashed: #0 0x90074f9c in memmove #1 0x90074cc0 in memmove #2 0x00002c94 in main (crt.c:300) #3 0x00002584 in _start (crt.c:267) #4 0x00002404 in start
PPC Thread State: srr0: 0x90074f9c srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x90074cc0 ctr: 0x90074cbc mq: 0x00000000 r0: 0x00000018 r1: 0xbffff910 r2: 0x0408040c r3: 0x0003b308 r4: 0x0103ccc0 r5: 0x00000060 r6: 0xfffc4cf8 r7: 0xa0002900 r8: 0x90074cbc r9: 0x00000078 r10: 0x00000008 r11: 0x000029fc r12: 0x0003b308 r13: 0x0000000c r14: 0x00028f40 r15: 0x00042680 r16: 0x0003b2d0 r17: 0x0002c920 r18: 0x80018a88 r19: 0x00018a88 r20: 0x00032680 r21: 0x000003e8 r22: 0x0103d170 r23: 0x01001ee0 r24: 0x0003b290 r25: 0x00022264 r26: 0x0003b270 r27: 0x00042640 r28: 0x00042640 r29: 0x00042640 r30: 0xbffff8e0 r31: 0x00002640
**********
Date/Time: 2003-01-12 03:24:11 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 474
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00001934 srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x20000000 lr: 0x00001aa4 ctr: 0x00001ab8 mq: 0x00000000 r0: 0x00001ab8 r1: 0x00000000 r2: 0x00000000 r3: 0x82000424 r4: 0x00001ab8 r5: 0x00001914 r6: 0xbfffe9e8 r7: 0x000253e0 r8: 0x00000028 r9: 0x00000000 r10: 0x4e800420 r11: 0xbfffee68 r12: 0x00001914 r13: 0x0000194c r14: 0xbfffee83 r15: 0xbfffee80 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb70 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb80 r30: 0xbfffe970 r31: 0x0000194c
**********
Date/Time: 2003-01-12 03:24:13 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 496
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00002670 srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00002648 ctr: 0x0000298c mq: 0x00000000 r0: 0x0000298c r1: 0x00000000 r2: 0x00000000 r3: 0x0002c928 r4: 0x00000000 r5: 0x0000000e r6: 0x00000000 r7: 0x00000000 r8: 0xbfffe81c r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x0000000f r14: 0x00000020 r15: 0x00042684 r16: 0x0000000e r17: 0x00032684 r18: 0x0000298c r19: 0x00002a0c r20: 0x00022684 r21: 0x00002684 r22: 0xbfffed90 r23: 0x00002ac8 r24: 0x00000000 r25: 0x0002c928 r26: 0x00042684 r27: 0xbfffed90 r28: 0x00000002 r29: 0x00002648 r30: 0xbfffe7d0 r31: 0x000025d4
**********
Date/Time: 2003-01-12 03:24:19 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 631
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00001920
Thread 0 Crashed: #0 0x0000c4bc in _p_write_init (file.c:2618) #1 0x0000eda4 in _p_write (rts-va.c:301) #2 0x00001b1c in pascal_main_program (crt.c:300) #3 0x00001c84 in main (crt.c:300) #4 0x00001864 in _start (crt.c:267) #5 0x000016e4 in start
PPC Thread State: srr0: 0x0000c4bc srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0000c478 ctr: 0x00001bec mq: 0x00000000 r0: 0x00004000 r1: 0xbffff8b0 r2: 0x00000000 r3: 0x000001c2 r4: 0x000018ec r5: 0x00000000 r6: 0x00000011 r7: 0x00027e00 r8: 0x00000009 r9: 0x00000014 r10: 0x00001bec r11: 0x00041920 r12: 0x44000284 r13: 0x00041a68 r14: 0x00021920 r15: 0x00041920 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000180 r29: 0x00000000 r30: 0x000018ec r31: 0x0000c478
**********
Date/Time: 2003-01-12 03:25:41 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2053
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f390
Thread 0 Crashed: #0 0x000022cc in R (crt.c:300) #1 0x00021850 in Test (crt.c:300) #2 0x000219f4 in pascal_main_program (crt.c:300) #3 0x00021b48 in main (crt.c:300) #4 0x00001e8c in _start (crt.c:267) #5 0x00001d0c in start
PPC Thread State: srr0: 0x000022cc srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000215f4
**********
Date/Time: 2003-01-12 03:25:52 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2080
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f2b0
Thread 0 Crashed: #0 0x00002b5c in R (crt.c:300) #1 0x00022860 in Test (crt.c:300) #2 0x00022a04 in pascal_main_program (crt.c:300) #3 0x00022b58 in main (crt.c:300) #4 0x0000271c in _start (crt.c:267) #5 0x0000259c in start
PPC Thread State: srr0: 0x00002b5c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00022860 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f930 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000003 r4: 0x00000000 r5: 0x00000003 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004c8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x00022604
**********
Date/Time: 2003-01-12 03:26:01 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2107
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff79a10
Thread 0 Crashed: #0 0x000029ac in R (crt.c:300) #1 0x0001b81c in Test (crt.c:300) #2 0x0001b9c0 in pascal_main_program (crt.c:300) #3 0x0001bb14 in main (crt.c:300) #4 0x0000256c in _start (crt.c:267) #5 0x000023ec in start
PPC Thread State: srr0: 0x000029ac srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0001b81c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff7a090 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x000458b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x0001b5c0
**********
Date/Time: 2003-01-12 03:26:10 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2134
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff79a30
Thread 0 Crashed: #0 0x00002a5c in R (crt.c:300) #1 0x0001b824 in Test (crt.c:300) #2 0x0001b9c8 in pascal_main_program (crt.c:300) #3 0x0001bb1c in main (crt.c:300) #4 0x0000261c in _start (crt.c:267) #5 0x0000249c in start
PPC Thread State: srr0: 0x00002a5c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0001b824 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff7a0b0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x000458b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x0001b5c8
**********
Date/Time: 2003-01-12 03:26:18 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2161
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff79a10
Thread 0 Crashed: #0 0x00002a54 in R (crt.c:300) #1 0x0001b81c in Test (crt.c:300) #2 0x0001b9c0 in pascal_main_program (crt.c:300) #3 0x0001bb14 in main (crt.c:300) #4 0x00002614 in _start (crt.c:267) #5 0x00002494 in start
PPC Thread State: srr0: 0x00002a54 srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0001b81c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff7a090 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x000458b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x0001b5c0
**********
Date/Time: 2003-01-12 03:26:38 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2263
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f370
Thread 0 Crashed: #0 0x000022cc in R (crt.c:300) #1 0x00021850 in Test (crt.c:300) #2 0x000219f4 in pascal_main_program (crt.c:300) #3 0x00021b48 in main (crt.c:300) #4 0x00001e8c in _start (crt.c:267) #5 0x00001d0c in start
PPC Thread State: srr0: 0x000022cc srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f9f0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000215f4
**********
Date/Time: 2003-01-12 03:26:48 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2290
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f390
Thread 0 Crashed: #0 0x0000238c in R (crt.c:300) #1 0x00021850 in Test (crt.c:300) #2 0x000219f4 in pascal_main_program (crt.c:300) #3 0x00021b48 in main (crt.c:300) #4 0x00001f4c in _start (crt.c:267) #5 0x00001dcc in start
PPC Thread State: srr0: 0x0000238c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000215f4
**********
Date/Time: 2003-01-12 03:26:59 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2317
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f390
Thread 0 Crashed: #0 0x0000238c in R (crt.c:300) #1 0x00021850 in Test (crt.c:300) #2 0x000219f4 in pascal_main_program (crt.c:300) #3 0x00021b48 in main (crt.c:300) #4 0x00001f4c in _start (crt.c:267) #5 0x00001dcc in start
PPC Thread State: srr0: 0x0000238c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000215f4
**********
Date/Time: 2003-01-12 03:27:10 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2344
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f2d0
Thread 0 Crashed: #0 0x00002b4c in R (crt.c:300) #1 0x00022850 in Test (crt.c:300) #2 0x000229f4 in pascal_main_program (crt.c:300) #3 0x00022b48 in main (crt.c:300) #4 0x0000270c in _start (crt.c:267) #5 0x0000258c in start
PPC Thread State: srr0: 0x00002b4c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00022850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f950 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004c8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000225f4
**********
Date/Time: 2003-01-12 03:27:20 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2371
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f390
Thread 0 Crashed: #0 0x000022cc in R (crt.c:300) #1 0x00021850 in Test (crt.c:300) #2 0x000219f4 in pascal_main_program (crt.c:300) #3 0x00021b48 in main (crt.c:300) #4 0x00001e8c in _start (crt.c:267) #5 0x00001d0c in start
PPC Thread State: srr0: 0x000022cc srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000215f4
**********
Date/Time: 2003-01-12 03:27:31 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2398
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f370
Thread 0 Crashed: #0 0x000022cc in R (crt.c:300) #1 0x00021850 in Test (crt.c:300) #2 0x000219f4 in pascal_main_program (crt.c:300) #3 0x00021b48 in main (crt.c:300) #4 0x00001e8c in _start (crt.c:267) #5 0x00001d0c in start
PPC Thread State: srr0: 0x000022cc srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f9f0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000215f4
**********
Date/Time: 2003-01-12 03:27:42 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2425
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f370
Thread 0 Crashed: #0 0x0000244c in R (crt.c:300) #1 0x00021850 in Test (crt.c:300) #2 0x000219f4 in pascal_main_program (crt.c:300) #3 0x00021b48 in main (crt.c:300) #4 0x0000200c in _start (crt.c:267) #5 0x00001e8c in start
PPC Thread State: srr0: 0x0000244c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f9f0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000215f4
**********
Date/Time: 2003-01-12 03:27:52 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2452
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f390
Thread 0 Crashed: #0 0x0000244c in R (crt.c:300) #1 0x00021850 in Test (crt.c:300) #2 0x000219f4 in pascal_main_program (crt.c:300) #3 0x00021b48 in main (crt.c:300) #4 0x0000200c in _start (crt.c:267) #5 0x00001e8c in start
PPC Thread State: srr0: 0x0000244c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000215f4
**********
Date/Time: 2003-01-12 03:29:28 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2879
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d30
Thread 0 Crashed: #0 0x0000248c in R (crt.c:300) #1 0x00030854 in Test (crt.c:300) #2 0x000309f8 in pascal_main_program (crt.c:300) #3 0x00030b4c in main (crt.c:300) #4 0x0000204c in _start (crt.c:267) #5 0x00001ecc in start
PPC Thread State: srr0: 0x0000248c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000305f8
**********
Date/Time: 2003-01-12 03:29:46 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2906
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8bf0
Thread 0 Crashed: #0 0x0000295c in R (crt.c:300) #1 0x00031864 in Test (crt.c:300) #2 0x00031a08 in pascal_main_program (crt.c:300) #3 0x00031b5c in main (crt.c:300) #4 0x0000251c in _start (crt.c:267) #5 0x0000239c in start
PPC Thread State: srr0: 0x0000295c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00031864 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9270 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000003 r4: 0x00000000 r5: 0x00000003 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x00031608
**********
Date/Time: 2003-01-12 03:30:00 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2933
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff38710
Thread 0 Crashed: #0 0x00001cf4 in R (crt.c:300) #1 0x0002681c in Test (crt.c:300) #2 0x000269c0 in pascal_main_program (crt.c:300) #3 0x00026b14 in main (crt.c:300) #4 0x000018b4 in _start (crt.c:267) #5 0x00001734 in start
PPC Thread State: srr0: 0x00001cf4 srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0002681c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff38d90 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x000508b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000265c0
**********
Date/Time: 2003-01-12 03:30:13 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2960
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff38730
Thread 0 Crashed: #0 0x00001df4 in R (crt.c:300) #1 0x00026820 in Test (crt.c:300) #2 0x000269c4 in pascal_main_program (crt.c:300) #3 0x00026b18 in main (crt.c:300) #4 0x000019b4 in _start (crt.c:267) #5 0x00001834 in start
PPC Thread State: srr0: 0x00001df4 srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00026820 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff38db0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x000508b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000265c4
**********
Date/Time: 2003-01-12 03:30:26 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2987
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff38710
Thread 0 Crashed: #0 0x00001df4 in R (crt.c:300) #1 0x00026820 in Test (crt.c:300) #2 0x000269c4 in pascal_main_program (crt.c:300) #3 0x00026b18 in main (crt.c:300) #4 0x000019b4 in _start (crt.c:267) #5 0x00001834 in start
PPC Thread State: srr0: 0x00001df4 srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00026820 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff38d90 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x000508b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000265c4
**********
Date/Time: 2003-01-12 03:30:43 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3039
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff369a0
Thread 0 Crashed: #0 0x0000278c in R (crt.c:300) #1 0x000238c8 in Test (crt.c:300) #2 0x00023a6c in pascal_main_program (crt.c:300) #3 0x00023bc0 in main (crt.c:300) #4 0x0000234c in _start (crt.c:267) #5 0x000021cc in start
PPC Thread State: srr0: 0x0000278c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x000238c8 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff37020 r1: 0xbffff980 r2: 0x00000000 r3: 0x0000000a r4: 0x00000000 r5: 0x0000000a r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0004d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000237ac
**********
Date/Time: 2003-01-12 03:31:00 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3091
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d10
Thread 0 Crashed: #0 0x00002484 in R (crt.c:300) #1 0x0003084c in Test (crt.c:300) #2 0x000309f0 in pascal_main_program (crt.c:300) #3 0x00030b44 in main (crt.c:300) #4 0x00002044 in _start (crt.c:267) #5 0x00001ec4 in start
PPC Thread State: srr0: 0x00002484 srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003084c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9390 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000305f0
**********
Date/Time: 2003-01-12 03:31:15 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3118
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d30
Thread 0 Crashed: #0 0x000025ac in R (crt.c:300) #1 0x00030854 in Test (crt.c:300) #2 0x000309f8 in pascal_main_program (crt.c:300) #3 0x00030b4c in main (crt.c:300) #4 0x0000216c in _start (crt.c:267) #5 0x00001fec in start
PPC Thread State: srr0: 0x000025ac srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000305f8
**********
Date/Time: 2003-01-12 03:31:31 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3145
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d30
Thread 0 Crashed: #0 0x000025ac in R (crt.c:300) #1 0x00030854 in Test (crt.c:300) #2 0x000309f8 in pascal_main_program (crt.c:300) #3 0x00030b4c in main (crt.c:300) #4 0x0000216c in _start (crt.c:267) #5 0x00001fec in start
PPC Thread State: srr0: 0x000025ac srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000305f8
**********
Date/Time: 2003-01-12 03:31:52 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3172
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8c10
Thread 0 Crashed: #0 0x0000294c in R (crt.c:300) #1 0x00031854 in Test (crt.c:300) #2 0x000319f8 in pascal_main_program (crt.c:300) #3 0x00031b4c in main (crt.c:300) #4 0x0000250c in _start (crt.c:267) #5 0x0000238c in start
PPC Thread State: srr0: 0x0000294c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00031854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9290 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000315f8
**********
Date/Time: 2003-01-12 03:32:07 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3199
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d30
Thread 0 Crashed: #0 0x0000248c in R (crt.c:300) #1 0x00030854 in Test (crt.c:300) #2 0x000309f8 in pascal_main_program (crt.c:300) #3 0x00030b4c in main (crt.c:300) #4 0x0000204c in _start (crt.c:267) #5 0x00001ecc in start
PPC Thread State: srr0: 0x0000248c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000305f8
**********
Date/Time: 2003-01-12 03:32:23 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3226
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d10
Thread 0 Crashed: #0 0x00002484 in R (crt.c:300) #1 0x0003084c in Test (crt.c:300) #2 0x000309f0 in pascal_main_program (crt.c:300) #3 0x00030b44 in main (crt.c:300) #4 0x00002044 in _start (crt.c:267) #5 0x00001ec4 in start
PPC Thread State: srr0: 0x00002484 srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003084c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9390 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000305f0
**********
Date/Time: 2003-01-12 03:32:39 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3253
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d10
Thread 0 Crashed: #0 0x000026c4 in R (crt.c:300) #1 0x0003084c in Test (crt.c:300) #2 0x000309f0 in pascal_main_program (crt.c:300) #3 0x00030b44 in main (crt.c:300) #4 0x00002284 in _start (crt.c:267) #5 0x00002104 in start
PPC Thread State: srr0: 0x000026c4 srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003084c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9390 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000305f0
**********
Date/Time: 2003-01-12 03:32:55 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3280
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d30
Thread 0 Crashed: #0 0x000026cc in R (crt.c:300) #1 0x00030854 in Test (crt.c:300) #2 0x000309f8 in pascal_main_program (crt.c:300) #3 0x00030b4c in main (crt.c:300) #4 0x0000228c in _start (crt.c:267) #5 0x0000210c in start
PPC Thread State: srr0: 0x000026cc srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff980 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff9b4 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb6c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb7c r30: 0xbffff980 r31: 0x000305f8
**********
Date/Time: 2003-01-12 03:33:30 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3351
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef7400
Thread 0 Crashed: #0 0x000029ec in R (crt.c:300) #1 0x0003382c in Test (crt.c:300) #2 0x000339c0 in pascal_main_program (crt.c:300) #3 0x00033b14 in main (crt.c:300) #4 0x000025ac in _start (crt.c:267) #5 0x0000242c in start
PPC Thread State: srr0: 0x000029ec srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003382c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef7aa0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb60 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb70 r30: 0xbffff960 r31: 0x000335d0
**********
Date/Time: 2003-01-12 03:33:47 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3378
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef7420
Thread 0 Crashed: #0 0x00002b44 in R (crt.c:300) #1 0x00033834 in Test (crt.c:300) #2 0x000339c8 in pascal_main_program (crt.c:300) #3 0x00033b1c in main (crt.c:300) #4 0x00002704 in _start (crt.c:267) #5 0x00002584 in start
PPC Thread State: srr0: 0x00002b44 srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00033834 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef7ac0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb60 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb70 r30: 0xbffff960 r31: 0x000335d8
**********
Date/Time: 2003-01-12 03:34:04 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3405
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef7400
Thread 0 Crashed: #0 0x00002b3c in R (crt.c:300) #1 0x0003382c in Test (crt.c:300) #2 0x000339c0 in pascal_main_program (crt.c:300) #3 0x00033b14 in main (crt.c:300) #4 0x000026fc in _start (crt.c:267) #5 0x0000257c in start
PPC Thread State: srr0: 0x00002b3c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003382c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef7aa0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb60 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb70 r30: 0xbffff960 r31: 0x000335d0
**********
Date/Time: 2003-01-12 03:34:22 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 3457
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff36980
Thread 0 Crashed: #0 0x000023a4 in R (crt.c:300) #1 0x000238d8 in Test (crt.c:300) #2 0x00023a6c in pascal_main_program (crt.c:300) #3 0x00023bc0 in main (crt.c:300) #4 0x00001f64 in _start (crt.c:267) #5 0x00001de4 in start
PPC Thread State: srr0: 0x000023a4 srr1: 0x0000d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x000238d8 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff37020 r1: 0xbffff960 r2: 0x00000000 r3: 0x0000000a r4: 0x00000000 r5: 0x0000000a r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb60 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb70 r30: 0xbffff960 r31: 0x000237bc
Frank Heckenbach wrote:
P.S. Same results with -gstabs
Just to be sure, did you write `EXTRA_TEST_PFLAGS=-gstabs' (not CFLAGS or so)? ....
This is what I did ....
[G4:~/gnu/testgpc/test] adriaan% make EXTRA_TEST_PFLAGS=-gstabs
... Did you also try with `-g0'?
And this is what I did also ....
[G4:~/gnu/testgpc/test] adriaan% make EXTRA_TEST_PFLAGS=-g0
However, Mac OS X crashreporter still gives me backtraces with routine names and line numbers. Is this expected behaviour ?
Sorry, I were wrong, -g0 gives me routine names in backtraces but not line numbers nor source file names. Here is the more complete version of the backtraces.
**********
Date/Time: 2003-01-12 02:22:12 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 15718
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00001a84 srr1: 0x0000d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00001a5c ctr: 0x00001bc8 mq: 0x00000000 r0: 0x00001bc8 r1: 0x00000000 r2: 0x00000000 r3: 0x0002b920 r4: 0x00000000 r5: 0x00001a5c r6: 0x00000000 r7: 0x00000000 r8: 0xbffff8a8 r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000424 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffff908 r30: 0xbffff880 r31: 0x00001a28
**********
Date/Time: 2003-01-12 02:22:13 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 15740
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00001a84 srr1: 0x0000d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00001a5c ctr: 0x00001bc8 mq: 0x00000000 r0: 0x00001bc8 r1: 0x00000000 r2: 0x00000000 r3: 0x0002b920 r4: 0x00000000 r5: 0x00001a5c r6: 0x00000000 r7: 0x00000000 r8: 0xbffff8a8 r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000424 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffff908 r30: 0xbffff880 r31: 0x00001a28
**********
Date/Time: 2003-01-12 02:23:29 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 18365
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfbef9e0
Thread 0 Crashed: #0 0x00001afc in pascal_main_program (fjf582.pas:29) #1 0x00001a2c in _start (crt.c:267) #2 0x000018ac in start
PPC Thread State: srr0: 0x00001afc srr1: 0x0000d030 vrsave: 0x00000000 xer: 0x20000000 lr: 0x00001ae8 ctr: 0x900051a0 mq: 0x00000000 r0: 0x00001c7c r1: 0xbffffa50 r2: 0x00031ae8 r3: 0x00000000 r4: 0xffbeff90 r5: 0xffbe0000 r6: 0x00001cb4 r7: 0x00000000 r8: 0x00038370 r9: 0x00032748 r10: 0x0002b92c r11: 0x00000000 r12: 0x00000000 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb60 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb70 r30: 0xbffffb64 r31: 0x00001ae8
**********
Date/Time: 2003-01-12 02:28:27 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 27297
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0x87859393
Backtrace not available
PPC Thread State: srr0: 0x00002688 srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00002660 ctr: 0x00002920 mq: 0x00000000 r0: 0x00002920 r1: 0x87859393 r2: 0x00000000 r3: 0x0002c928 r4: 0x00042604 r5: 0x00000010 r6: 0x00002660 r7: 0x00000000 r8: 0xbfffef64 r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000001 r14: 0x000026a0 r15: 0x000426a0 r16: 0xbfffefe3 r17: 0x00000011 r18: 0x00028e94 r19: 0x000226a0 r20: 0x00000003 r21: 0x000226a0 r22: 0x000426a0 r23: 0x00000000 r24: 0x0002c928 r25: 0x000426a0 r26: 0xbffff5e0 r27: 0x0000000c r28: 0x00000002 r29: 0xbffff5c8 r30: 0xbfffef30 r31: 0x00002604
**********
Date/Time: 2003-01-12 02:28:41 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 27588
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00001a38
Thread 0 Crashed: #0 0x0000c4f0 in _p_write_init (file.c:2618) #1 0x0000de48 in _p_write (rts-va.c:301) #2 0x00001b58 in pascal_main_program (goto4.pas:18) #3 0x00001cb8 in main (goto4.pas:19) #4 0x0000197c in _start (crt.c:267) #5 0x000017fc in start
PPC Thread State: srr0: 0x0000c4f0 srr1: 0x0000d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0000c4ac ctr: 0x00001c20 mq: 0x00000000 r0: 0x00004000 r1: 0xbffff890 r2: 0x00000000 r3: 0x000001c2 r4: 0x00001a04 r5: 0x00000000 r6: 0x0000000e r7: 0x0000004b r8: 0x00000016 r9: 0x0000001c r10: 0x00041a38 r11: 0x00000000 r12: 0x44000424 r13: 0x00000000 r14: 0x00041a38 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb60 r27: 0x0000000c r28: 0x00000180 r29: 0x00000000 r30: 0x00001a04 r31: 0x0000c4ac
**********
Date/Time: 2003-01-12 02:28:42 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 27610
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00001a74 srr1: 0x0000d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00001a4c ctr: 0x00001bfc mq: 0x00000000 r0: 0x00001bfc r1: 0x00000000 r2: 0x00000000 r3: 0x0002b920 r4: 0x00000000 r5: 0x00001a4c r6: 0x00000000 r7: 0x00000000 r8: 0xbffff8a8 r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000424 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb60 r27: 0x0000000c r28: 0x00000002 r29: 0xbffff908 r30: 0xbffff880 r31: 0x00001a18
**********
Date/Time: 2003-01-12 02:30:28 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 432
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0x0103ccc0
Thread 0 Crashed: #0 0x90074f9c in memmove #1 0x90074cc0 in memmove #2 0x00002c94 in main (math.pas:107) #3 0x00002584 in _start (crt.c:267) #4 0x00002404 in start
PPC Thread State: srr0: 0x90074f9c srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x90074cc0 ctr: 0x90074cbc mq: 0x00000000 r0: 0x00000018 r1: 0xbffff8f0 r2: 0x0408040c r3: 0x0003b308 r4: 0x0103ccc0 r5: 0x00000060 r6: 0xfffc4cf8 r7: 0xa0002900 r8: 0x90074cbc r9: 0x00000078 r10: 0x00000008 r11: 0x000029fc r12: 0x0003b308 r13: 0x0000000c r14: 0x00028f40 r15: 0x00042680 r16: 0x0003b2d0 r17: 0x0002c920 r18: 0x80018a88 r19: 0x00018a88 r20: 0x00032680 r21: 0x000003e8 r22: 0x0103d170 r23: 0x01001ee0 r24: 0x0003b290 r25: 0x00022264 r26: 0x0003b270 r27: 0x00042640 r28: 0x00042640 r29: 0x00042640 r30: 0xbffff8c0 r31: 0x00002640
**********
Date/Time: 2003-01-12 02:31:57 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2746
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00001934 srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x20000000 lr: 0x00001aa4 ctr: 0x00001ab8 mq: 0x00000000 r0: 0x00001ab8 r1: 0x00000000 r2: 0x00000000 r3: 0x82000424 r4: 0x00001ab8 r5: 0x00001914 r6: 0xbfffe9c8 r7: 0x000253e0 r8: 0x00000028 r9: 0x00000000 r10: 0x4e800420 r11: 0xbfffee48 r12: 0x00001914 r13: 0x0000194c r14: 0xbfffee63 r15: 0xbfffee60 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb60 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb70 r30: 0xbfffe950 r31: 0x0000194c
**********
Date/Time: 2003-01-12 02:31:59 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2768
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Backtrace not available
PPC Thread State: srr0: 0x00002670 srr1: 0x0000f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00002648 ctr: 0x0000298c mq: 0x00000000 r0: 0x0000298c r1: 0x00000000 r2: 0x00000000 r3: 0x0002c928 r4: 0x00000000 r5: 0x0000000e r6: 0x00000000 r7: 0x00000000 r8: 0xbfffe7fc r9: 0x00000000 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x0000000f r14: 0x00000020 r15: 0x00042684 r16: 0x0000000e r17: 0x00032684 r18: 0x0000298c r19: 0x00002a0c r20: 0x00022684 r21: 0x00002684 r22: 0xbfffed70 r23: 0x00002ac8 r24: 0x00000000 r25: 0x0002c928 r26: 0x00042684 r27: 0xbfffed70 r28: 0x00000002 r29: 0x00002648 r30: 0xbfffe7b0 r31: 0x000025d4
**********
Date/Time: 2003-01-12 02:32:05 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 2902
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00001920
Thread 0 Crashed: #0 0x0000c4bc in _p_write_init (file.c:2618) #1 0x0000eda4 in _p_write (rts-va.c:301) #2 0x00001b1c in pascal_main_program (nonlocgoto.pas:28) #3 0x00001c84 in main (nonlocgoto.pas:29) #4 0x00001864 in _start (crt.c:267) #5 0x000016e4 in start
PPC Thread State: srr0: 0x0000c4bc srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0000c478 ctr: 0x00001bec mq: 0x00000000 r0: 0x00004000 r1: 0xbffff890 r2: 0x00000000 r3: 0x000001c2 r4: 0x000018ec r5: 0x00000000 r6: 0x00000011 r7: 0x00027e00 r8: 0x00000009 r9: 0x00000014 r10: 0x00001bec r11: 0x00041920 r12: 0x44000284 r13: 0x00041a68 r14: 0x00021920 r15: 0x00041920 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000180 r29: 0x00000000 r30: 0x000018ec r31: 0x0000c478
**********
Date/Time: 2003-01-12 02:33:21 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4323
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f370
Thread 0 Crashed: #0 0x000022cc in R (readb1.pas:176) #1 0x00021850 in Test (readb1.pas:316) #2 0x000219f4 in pascal_main_program (readb1.pas:18) #3 0x00021b48 in main (readb1.pas:18) #4 0x00001e8c in _start (crt.c:267) #5 0x00001d0c in start
PPC Thread State: srr0: 0x000022cc srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000215f4
**********
Date/Time: 2003-01-12 02:33:31 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4350
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f290
Thread 0 Crashed: #0 0x00002b5c in R (readb10.pas:176) #1 0x00022860 in Test (readb10.pas:316) #2 0x00022a04 in pascal_main_program (readb10.pas:18) #3 0x00022b58 in main (readb10.pas:18) #4 0x0000271c in _start (crt.c:267) #5 0x0000259c in start
PPC Thread State: srr0: 0x00002b5c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00022860 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f930 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000003 r4: 0x00000000 r5: 0x00000003 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004c8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x00022604
**********
Date/Time: 2003-01-12 02:33:39 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4377
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff799f0
Thread 0 Crashed: #0 0x000029ac in R (readb11.pas:176) #1 0x0001b81c in Test (readb11.pas:316) #2 0x0001b9c0 in pascal_main_program (readb11.pas:18) #3 0x0001bb14 in main (readb11.pas:18) #4 0x0000256c in _start (crt.c:267) #5 0x000023ec in start
PPC Thread State: srr0: 0x000029ac srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0001b81c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff7a090 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x000458b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x0001b5c0
**********
Date/Time: 2003-01-12 02:33:47 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4404
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff79a10
Thread 0 Crashed: #0 0x00002a5c in R (readb12.pas:176) #1 0x0001b824 in Test (readb12.pas:316) #2 0x0001b9c8 in pascal_main_program (readb12.pas:18) #3 0x0001bb1c in main (readb12.pas:18) #4 0x0000261c in _start (crt.c:267) #5 0x0000249c in start
PPC Thread State: srr0: 0x00002a5c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0001b824 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff7a0b0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x000458b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x0001b5c8
**********
Date/Time: 2003-01-12 02:33:55 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4431
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff799f0
Thread 0 Crashed: #0 0x00002a54 in R (readb13.pas:176) #1 0x0001b81c in Test (readb13.pas:316) #2 0x0001b9c0 in pascal_main_program (readb13.pas:18) #3 0x0001bb14 in main (readb13.pas:18) #4 0x00002614 in _start (crt.c:267) #5 0x00002494 in start
PPC Thread State: srr0: 0x00002a54 srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0001b81c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff7a090 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x000458b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x0001b5c0
**********
Date/Time: 2003-01-12 02:34:13 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4533
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f350
Thread 0 Crashed: #0 0x000022cc in R (readb2.pas:176) #1 0x00021850 in Test (readb2.pas:316) #2 0x000219f4 in pascal_main_program (readb2.pas:18) #3 0x00021b48 in main (readb2.pas:18) #4 0x00001e8c in _start (crt.c:267) #5 0x00001d0c in start
PPC Thread State: srr0: 0x000022cc srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f9f0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000215f4
**********
Date/Time: 2003-01-12 02:34:22 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4560
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f370
Thread 0 Crashed: #0 0x0000238c in R (readb3.pas:176) #1 0x00021850 in Test (readb3.pas:316) #2 0x000219f4 in pascal_main_program (readb3.pas:18) #3 0x00021b48 in main (readb3.pas:18) #4 0x00001f4c in _start (crt.c:267) #5 0x00001dcc in start
PPC Thread State: srr0: 0x0000238c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000215f4
**********
Date/Time: 2003-01-12 02:34:32 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4587
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f370
Thread 0 Crashed: #0 0x0000238c in R (readb4.pas:176) #1 0x00021850 in Test (readb4.pas:316) #2 0x000219f4 in pascal_main_program (readb4.pas:18) #3 0x00021b48 in main (readb4.pas:18) #4 0x00001f4c in _start (crt.c:267) #5 0x00001dcc in start
PPC Thread State: srr0: 0x0000238c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000215f4
**********
Date/Time: 2003-01-12 02:34:42 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4614
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f2b0
Thread 0 Crashed: #0 0x00002b4c in R (readb5.pas:176) #1 0x00022850 in Test (readb5.pas:316) #2 0x000229f4 in pascal_main_program (readb5.pas:18) #3 0x00022b48 in main (readb5.pas:18) #4 0x0000270c in _start (crt.c:267) #5 0x0000258c in start
PPC Thread State: srr0: 0x00002b4c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00022850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f950 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004c8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000225f4
**********
Date/Time: 2003-01-12 02:34:52 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4641
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f370
Thread 0 Crashed: #0 0x000022cc in R (readb6.pas:176) #1 0x00021850 in Test (readb6.pas:316) #2 0x000219f4 in pascal_main_program (readb6.pas:18) #3 0x00021b48 in main (readb6.pas:18) #4 0x00001e8c in _start (crt.c:267) #5 0x00001d0c in start
PPC Thread State: srr0: 0x000022cc srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000215f4
**********
Date/Time: 2003-01-12 02:35:02 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4668
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f350
Thread 0 Crashed: #0 0x000022cc in R (readb7.pas:176) #1 0x00021850 in Test (readb7.pas:316) #2 0x000219f4 in pascal_main_program (readb7.pas:18) #3 0x00021b48 in main (readb7.pas:18) #4 0x00001e8c in _start (crt.c:267) #5 0x00001d0c in start
PPC Thread State: srr0: 0x000022cc srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f9f0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000215f4
**********
Date/Time: 2003-01-12 02:35:12 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4695
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f350
Thread 0 Crashed: #0 0x0000244c in R (readb8.pas:176) #1 0x00021850 in Test (readb8.pas:316) #2 0x000219f4 in pascal_main_program (readb8.pas:18) #3 0x00021b48 in main (readb8.pas:18) #4 0x0000200c in _start (crt.c:267) #5 0x00001e8c in start
PPC Thread State: srr0: 0x0000244c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4f9f0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000215f4
**********
Date/Time: 2003-01-12 02:35:21 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 4722
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff4f370
Thread 0 Crashed: #0 0x0000244c in R (readb9.pas:176) #1 0x00021850 in Test (readb9.pas:316) #2 0x000219f4 in pascal_main_program (readb9.pas:18) #3 0x00021b48 in main (readb9.pas:18) #4 0x0000200c in _start (crt.c:267) #5 0x00001e8c in start
PPC Thread State: srr0: 0x0000244c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00021850 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff4fa10 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000215f4
**********
Date/Time: 2003-01-12 02:36:42 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5151
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d10
Thread 0 Crashed: #0 0x0000248c in R (reade1.pas:176) #1 0x00030854 in Test (reade1.pas:316) #2 0x000309f8 in pascal_main_program (reade1.pas:18) #3 0x00030b4c in main (reade1.pas:18) #4 0x0000204c in _start (crt.c:267) #5 0x00001ecc in start
PPC Thread State: srr0: 0x0000248c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000305f8
**********
Date/Time: 2003-01-12 02:36:58 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5178
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8bd0
Thread 0 Crashed: #0 0x0000295c in R (reade10.pas:176) #1 0x00031864 in Test (reade10.pas:316) #2 0x00031a08 in pascal_main_program (reade10.pas:18) #3 0x00031b5c in main (reade10.pas:18) #4 0x0000251c in _start (crt.c:267) #5 0x0000239c in start
PPC Thread State: srr0: 0x0000295c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00031864 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9270 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000003 r4: 0x00000000 r5: 0x00000003 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x00031608
**********
Date/Time: 2003-01-12 02:37:14 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5205
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff386f0
Thread 0 Crashed: #0 0x00001cf4 in R (reade11.pas:176) #1 0x0002681c in Test (reade11.pas:316) #2 0x000269c0 in pascal_main_program (reade11.pas:18) #3 0x00026b14 in main (reade11.pas:18) #4 0x000018b4 in _start (crt.c:267) #5 0x00001734 in start
PPC Thread State: srr0: 0x00001cf4 srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0002681c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff38d90 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x000508b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000265c0
**********
Date/Time: 2003-01-12 02:37:27 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5232
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff38710
Thread 0 Crashed: #0 0x00001df4 in R (reade12.pas:176) #1 0x00026820 in Test (reade12.pas:316) #2 0x000269c4 in pascal_main_program (reade12.pas:18) #3 0x00026b18 in main (reade12.pas:18) #4 0x000019b4 in _start (crt.c:267) #5 0x00001834 in start
PPC Thread State: srr0: 0x00001df4 srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00026820 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff38db0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x000508b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000265c4
**********
Date/Time: 2003-01-12 02:37:44 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5260
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff386f0
Thread 0 Crashed: #0 0x00001df4 in R (reade13.pas:176) #1 0x00026820 in Test (reade13.pas:316) #2 0x000269c4 in pascal_main_program (reade13.pas:18) #3 0x00026b18 in main (reade13.pas:18) #4 0x000019b4 in _start (crt.c:267) #5 0x00001834 in start
PPC Thread State: srr0: 0x00001df4 srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00026820 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff38d90 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x000508b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000265c4
**********
Date/Time: 2003-01-12 02:37:59 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5312
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff36980
Thread 0 Crashed: #0 0x0000278c in R (reade15.pas:176) #1 0x000238c8 in Test (reade15.pas:316) #2 0x00023a6c in pascal_main_program (reade15.pas:18) #3 0x00023bc0 in main (reade15.pas:18) #4 0x0000234c in _start (crt.c:267) #5 0x000021cc in start
PPC Thread State: srr0: 0x0000278c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x000238c8 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff37020 r1: 0xbffff960 r2: 0x00000000 r3: 0x0000000a r4: 0x00000000 r5: 0x0000000a r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000237ac
**********
Date/Time: 2003-01-12 02:38:15 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5364
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8cf0
Thread 0 Crashed: #0 0x00002484 in R (reade2.pas:176) #1 0x0003084c in Test (reade2.pas:316) #2 0x000309f0 in pascal_main_program (reade2.pas:18) #3 0x00030b44 in main (reade2.pas:18) #4 0x00002044 in _start (crt.c:267) #5 0x00001ec4 in start
PPC Thread State: srr0: 0x00002484 srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003084c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9390 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000305f0
**********
Date/Time: 2003-01-12 02:38:44 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5391
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d10
Thread 0 Crashed: #0 0x000025ac in R (reade3.pas:176) #1 0x00030854 in Test (reade3.pas:316) #2 0x000309f8 in pascal_main_program (reade3.pas:18) #3 0x00030b4c in main (reade3.pas:18) #4 0x0000216c in _start (crt.c:267) #5 0x00001fec in start
PPC Thread State: srr0: 0x000025ac srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000305f8
**********
Date/Time: 2003-01-12 02:39:19 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5418
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d10
Thread 0 Crashed: #0 0x000025ac in R (reade4.pas:176) #1 0x00030854 in Test (reade4.pas:316) #2 0x000309f8 in pascal_main_program (reade4.pas:18) #3 0x00030b4c in main (reade4.pas:18) #4 0x0000216c in _start (crt.c:267) #5 0x00001fec in start
PPC Thread State: srr0: 0x000025ac srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000305f8
**********
Date/Time: 2003-01-12 02:39:39 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5445
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8bf0
Thread 0 Crashed: #0 0x0000294c in R (reade5.pas:176) #1 0x00031854 in Test (reade5.pas:316) #2 0x000319f8 in pascal_main_program (reade5.pas:18) #3 0x00031b4c in main (reade5.pas:18) #4 0x0000250c in _start (crt.c:267) #5 0x0000238c in start
PPC Thread State: srr0: 0x0000294c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00031854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9290 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005b8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000315f8
**********
Date/Time: 2003-01-12 02:40:04 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5472
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d10
Thread 0 Crashed: #0 0x0000248c in R (reade6.pas:176) #1 0x00030854 in Test (reade6.pas:316) #2 0x000309f8 in pascal_main_program (reade6.pas:18) #3 0x00030b4c in main (reade6.pas:18) #4 0x0000204c in _start (crt.c:267) #5 0x00001ecc in start
PPC Thread State: srr0: 0x0000248c srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000305f8
**********
Date/Time: 2003-01-12 02:40:18 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5499
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8cf0
Thread 0 Crashed: #0 0x00002484 in R (reade7.pas:176) #1 0x0003084c in Test (reade7.pas:316) #2 0x000309f0 in pascal_main_program (reade7.pas:18) #3 0x00030b44 in main (reade7.pas:18) #4 0x00002044 in _start (crt.c:267) #5 0x00001ec4 in start
PPC Thread State: srr0: 0x00002484 srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003084c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9390 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000305f0
**********
Date/Time: 2003-01-12 02:40:35 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5526
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8cf0
Thread 0 Crashed: #0 0x000026c4 in R (reade8.pas:176) #1 0x0003084c in Test (reade8.pas:316) #2 0x000309f0 in pascal_main_program (reade8.pas:18) #3 0x00030b44 in main (reade8.pas:18) #4 0x00002284 in _start (crt.c:267) #5 0x00002104 in start
PPC Thread State: srr0: 0x000026c4 srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003084c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef9390 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000305f0
**********
Date/Time: 2003-01-12 02:40:51 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5553
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef8d10
Thread 0 Crashed: #0 0x000026cc in R (reade9.pas:176) #1 0x00030854 in Test (reade9.pas:316) #2 0x000309f8 in pascal_main_program (reade9.pas:18) #3 0x00030b4c in main (reade9.pas:18) #4 0x0000228c in _start (crt.c:267) #5 0x0000210c in start
PPC Thread State: srr0: 0x000026cc srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00030854 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef93b0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000015 r4: 0x00000000 r5: 0x00000015 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005a8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb5c r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb6c r30: 0xbffff960 r31: 0x000305f8
**********
Date/Time: 2003-01-12 02:41:22 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5624
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef7400
Thread 0 Crashed: #0 0x000029ec in R (readg11.pas:176) #1 0x0003382c in Test (readg11.pas:316) #2 0x000339c0 in pascal_main_program (readg11.pas:13) #3 0x00033b14 in main (readg11.pas:13) #4 0x000025ac in _start (crt.c:267) #5 0x0000242c in start
PPC Thread State: srr0: 0x000029ec srr1: 0x0200d030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003382c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef7aa0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb50 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb60 r30: 0xbffff960 r31: 0x000335d0
**********
Date/Time: 2003-01-12 02:41:37 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5651
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef7420
Thread 0 Crashed: #0 0x00002b44 in R (readg12.pas:176) #1 0x00033834 in Test (readg12.pas:316) #2 0x000339c8 in pascal_main_program (readg12.pas:13) #3 0x00033b1c in main (readg12.pas:13) #4 0x00002704 in _start (crt.c:267) #5 0x00002584 in start
PPC Thread State: srr0: 0x00002b44 srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x00033834 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef7ac0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb50 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb60 r30: 0xbffff960 r31: 0x000335d8
**********
Date/Time: 2003-01-12 02:41:56 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5678
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbfef7400
Thread 0 Crashed: #0 0x00002b3c in R (readg13.pas:176) #1 0x0003382c in Test (readg13.pas:316) #2 0x000339c0 in pascal_main_program (readg13.pas:13) #3 0x00033b14 in main (readg13.pas:13) #4 0x000026fc in _start (crt.c:267) #5 0x0000257c in start
PPC Thread State: srr0: 0x00002b3c srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x0003382c ctr: 0x90003fe0 mq: 0x00000000 r0: 0xffef7aa0 r1: 0xbffff960 r2: 0x00000000 r3: 0x00000008 r4: 0x00000000 r5: 0x00000008 r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0005d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb50 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb60 r30: 0xbffff960 r31: 0x000335d0
**********
Date/Time: 2003-01-12 02:42:22 +0100 OS Version: 10.2 (Build 6C115) Host: G4.local.
Command: a.out PID: 5730
Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0xbff36980
Thread 0 Crashed: #0 0x000023a4 in R (readg15.pas:176) #1 0x000238d8 in Test (readg15.pas:316) #2 0x00023a6c in pascal_main_program (readg15.pas:13) #3 0x00023bc0 in main (readg15.pas:13) #4 0x00001f64 in _start (crt.c:267) #5 0x00001de4 in start
PPC Thread State: srr0: 0x000023a4 srr1: 0x0200f030 vrsave: 0x00000000 xer: 0x00000000 lr: 0x000238d8 ctr: 0x90003fe0 mq: 0x00000000 r0: 0xfff37020 r1: 0xbffff960 r2: 0x00000000 r3: 0x0000000a r4: 0x00000000 r5: 0x0000000a r6: 0x00000000 r7: 0x00000000 r8: 0xbffff994 r9: 0x0004d8b8 r10: 0x00000000 r11: 0x00000000 r12: 0x44000284 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000 r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000 r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000 r24: 0x00000000 r25: 0x00000000 r26: 0xbffffb50 r27: 0x0000000c r28: 0x00000002 r29: 0xbffffb60 r30: 0xbffff960 r31: 0x000237bc
**********
Adriaan van Os wrote:
However, Mac OS X crashreporter still gives me backtraces with routine names and line numbers. Is this expected behaviour ?
Sorry, I were wrong, -g0 gives me routine names in backtraces but not line numbers nor source file names.
AFAIK, that's expected as long as you don't strip the executable (`-s' or using the `strip' utility). Since global symbols must be known at link time, anyway, they're available even without debug info.
Frank
Adriaan van Os wrote:
Frank Heckenbach wrote:
Apparently there are bugs with nonlocal gotos (this also happens on Linux/S390) and trampolines (I've seen this reported on Solaris, but I think only with earlier GCC versions).
The Ada for Mac OS X project has a trampoline patch to libgcc.a. It fixes 12 out of 66 testsuite failures. I will post the source code of the patch, as soon as I have it.
OK, that's one bunch. I hope it gets integrated into GCC soon.
Leaves the nonlocal goto bug ...
Backtraces are at the bottom of this messages. It seems that Mac OS X doesn't like Mr. "R" ....
The read tests are quite heavy on stack usage. If you can increase the system limit (ulimit etc.), you might want try that. But I'm changing them now to reduce stack usage, so in the next GPC version, they might work (unless it's actually another bug).
Frank
Frank Heckenbach wrote:
Backtraces are at the bottom of this messages. It seems that Mac OS X doesn't like Mr. "R" ....
The read tests are quite heavy on stack usage. If you can increase the system limit (ulimit etc.), you might want try that. But I'm changing them now to reduce stack usage, so in the next GPC version, they might work (unless it's actually another bug).
Increasing the stacksize eliminates most test failures, including the gpc internal errors !!
[G4:~/gnu/testgpc/test] adriaan% limit stacksize 2048 [G4:~/gnu/testgpc/test] adriaan% make
[results included as attachement]
# of GPC tests 2856 # of GPC tests passed 2828 # of GPC tests skipped 18 # of GPC tests failed 10
This surpasses all my expectations. We are near to opening up a bottle of champagne !
Leaves the nonlocal goto bug ...
9 out of 10 failed tests, if I am right - fjf558m.pas, fjf558n.pas, fproc.pas, goto4.pas, goto5.pas, math.pas, nlgpp.pas, nlgpp2.pas and nonlocgoto.pas.
This reminds me of UCSD Pascal for the Apple II. It had a "Goto statements options" (G+,G-) aimed at students "to keep novice programmers from using the GOTO statement ..." Shouldn't we keep Macintosh programmers out of it also ?
Nevertheless, I will search the web for patches to the gcc powerpc back-end.
The remaining failed test is systemtest.pas: Error in HeapError #2
I didn't study GetMem in detail, but why not allocate 2147483391 bytes of virtual memory ?
Regards,
Adriaan van Os
Adriaan van Os wrote:
Frank Heckenbach wrote:
Backtraces are at the bottom of this messages. It seems that Mac OS X doesn't like Mr. "R" ....
The read tests are quite heavy on stack usage. If you can increase the system limit (ulimit etc.), you might want try that. But I'm changing them now to reduce stack usage, so in the next GPC version, they might work (unless it's actually another bug).
Increasing the stacksize eliminates most test failures, including the gpc internal errors !!
BTW, was it a soft or hard limit? GPC contains code that should eliminate the former, but of course, it's helpless against the latter. Anyway, a certain amount of stack usage for large programs probably just has to be accepted (note that the respective tests are actually quite large programs, despite their apparent file sizes, due to heavy use of macros etc.).
[G4:~/gnu/testgpc/test] adriaan% limit stacksize 2048 [G4:~/gnu/testgpc/test] adriaan% make
[results included as attachement]
# of GPC tests 2856 # of GPC tests passed 2828 # of GPC tests skipped 18 # of GPC tests failed 10
This surpasses all my expectations. We are near to opening up a bottle of champagne !
Leaves the nonlocal goto bug ...
9 out of 10 failed tests, if I am right - fjf558m.pas, fjf558n.pas, fproc.pas, goto4.pas, goto5.pas, math.pas, nlgpp.pas, nlgpp2.pas and nonlocgoto.pas.
Yes. It's a single issue, fortunately, but nevertheless an essential one for some applications.
This reminds me of UCSD Pascal for the Apple II. It had a "Goto statements options" (G+,G-) aimed at students "to keep novice programmers from using the GOTO statement ..." Shouldn't we keep Macintosh programmers out of it also ?
I'm not sure what you mean. I could add a warning (optional, of course) for every use of `goto'.
But, while I agree that `goto' should be avoided whenever possible, and I think it's always possible with local `goto's, some nonlocal `goto's can't be easily avoided, unless one resorts to C mechanisms like `longjmp' (see the `Trap' unit for an example).
The remaining failed test is systemtest.pas: Error in HeapError #2
I didn't study GetMem in detail, but why not allocate 2147483391 bytes of virtual memory ?
You're right. The test was meant to check the behaviour of some routine in an out-of-memory situation, but the way to reproduce this situation was poor.
Frank
Frank Heckenbach wrote:
BTW, was it a soft or hard limit? GPC contains code that should eliminate the former, but of course, it's helpless against the latter. Anyway, a certain amount of stack usage for large programs probably just has to be accepted (note that the respective tests are actually quite large programs, despite their apparent file sizes, due to heavy use of macros etc.).
It's a soft limit, that defaults to 512 KB. The hard limit defaults to 64 MB.
It's remarkable that the crashes are reported as EXC_BAD_ACCESS (0x0001) code KERN_INVALID_ADDRESS, not as stack overflow. I could do some debugging with GDB to see what’s happening. Actually, debugging GPC programs with GDB on Mac OS X seems to work.
You're right. The test was meant to check the behaviour of some routine in an out-of-memory situation, but the way to reproduce this situation was poor.
The new systemtest.pas give me this:
[G4:~/gnu/testgpc/test] adriaan% make MASK="systemtest.pas"
TEST systemtest.pas: *** malloc: vm_allocate(size=2147483648) failed with 3 *** malloc[1412]: error: Can't allocate region *** malloc: vm_allocate(size=2147483648) failed with 3 *** malloc[1412]: error: Can't allocate region OK
Regards,
Adriaan van Os
Adriaan van Os wrote:
BTW, was it a soft or hard limit? GPC contains code that should eliminate the former, but of course, it's helpless against the latter. Anyway, a certain amount of stack usage for large programs probably just has to be accepted (note that the respective tests are actually quite large programs, despite their apparent file sizes, due to heavy use of macros etc.).
It's a soft limit, that defaults to 512 KB. The hard limit defaults to 64 MB.
Oh, I just see, they seem to have removed the code (gcc-2.95.2/gcc/toplev.c:4783) in gcc-3. I could add the code to GPC now, but I guess there was some reason why they removed it (but the ChangeLog doesn't tell anything). Does anybody know anything about it?
It's remarkable that the crashes are reported as EXC_BAD_ACCESS (0x0001) code KERN_INVALID_ADDRESS, not as stack overflow. I could do some debugging with GDB to see whatÂs happening. Actually, debugging GPC programs with GDB on Mac OS X seems to work.
Systems vary in how they handle stack overflows. Under Linux I just get a segfault. I don't know which error codes Mac OS X has available, and if that's the expected one here ...
You're right. The test was meant to check the behaviour of some routine in an out-of-memory situation, but the way to reproduce this situation was poor.
The new systemtest.pas give me this:
[G4:~/gnu/testgpc/test] adriaan% make MASK="systemtest.pas"
TEST systemtest.pas: *** malloc: vm_allocate(size=2147483648) failed with 3 *** malloc[1412]: error: Can't allocate region *** malloc: vm_allocate(size=2147483648) failed with 3 *** malloc[1412]: error: Can't allocate region OK
I think that's a bug in malloc which should return NULL if no more memory is available, don't you agree?
A simple C test case is the following (which should run forever, and I suppose will abort on your platform):
#include <stdlib.h>
int main () { while (1) malloc (0x70000000); return 0; }
I could check for that issue and let the test be "SKIPPED" then. But first you might want to contact the C people or Apple to find out if they intend to fix the bug ...
Frank
Frank Heckenbach wrote:
The read tests are quite heavy on stack usage. If you can increase the system limit (ulimit etc.), you might want try that. But I'm changing them now to reduce stack usage, so in the next GPC version, they might work (unless it's actually another bug).
It's an interesting option to add -fstack-check to the test suite:
[G4:~/gnu/testgpc/test] adriaan% make MASK=readg1.pas EXTRA_PFLAGS=-fstack-check
Running the GPC Test Suite. This may take a while ...
rm -f *.dat *.o *.s *.gpm *.gpi *.gpd *.gpc core a.out stderr.out *.exe testmake.tmp dummy.c dummy.pas dummy.out diff_cr*.tmp fixcr fixcr.exe rm -f todo/a.out todo/*.exe todo/*.o todo/*.s todo/*.gpm todo/*.gpi todo/*.gpd todo/core { gpc --version | head -1; gpc --print-search-dirs | grep install | head -1; hostname || echo "unknown host"; } | \ sed -e 's,^,Testing ,;N;s,\n.*gcc-lib[/], (,;s,[/].*,),;N;s,\n, (,;s,$,),' Testing gpc 20021128, based on gcc-3.2.1 (powerpc-apple-darwin6.3) (G4.local.) echo "gpc -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused -fstack-check " gpc -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused -fstack-check PC="gpc" PFLAGS="--autobuild -g -O3 -W -Wall -Wundef -Wpointer-arith -Wno-unused -fstack-check " SRCDIR="." TEST_MAKE_FLAG=test-make-flag "./test_run" "readg1.pas" | "./test_sum" TEST readg1.pas: gpc1: warnings being treated as errors ./read2.inc: In procedure `R': In file included from ./readg1.pas:9: ./read2.inc:203: warning: frame size too large for reliable stack checking ./read2.inc:203: warning: try reducing the number of local variables failed awk: null file name in print or getline input record number 11, file source line number 14 make: *** [pascal.check-nomsg] Error 2
Adriaan van Os wrote:
Frank Heckenbach wrote:
The read tests are quite heavy on stack usage. If you can increase the system limit (ulimit etc.), you might want try that. But I'm changing them now to reduce stack usage, so in the next GPC version, they might work (unless it's actually another bug).
It's an interesting option to add -fstack-check to the test suite:
./read2.inc: In procedure `R': In file included from ./readg1.pas:9: ./read2.inc:203: warning: frame size too large for reliable stack checking ./read2.inc:203: warning: try reducing the number of local variables failed
Could you please try that again after the release of the next GPC alpha?
Frank
Frank Heckenbach wrote:
Adriaan van Os wrote:
Apparently there are bugs with nonlocal gotos (this also happens on Linux/S390) and trampolines (I've seen this reported on Solaris, but I think only with earlier GCC versions).
The Ada for Mac OS X project has a trampoline patch to libgcc.a. It fixes 12 out of 66 testsuite failures. I will post the source code of the patch, as soon as I have it.
OK, that's one bunch. I hope it gets integrated into GCC soon.
Leaves the nonlocal goto bug ...
Andrew Reynolds from the ADA for Mac OS X team has been so kind to send me this morning patches for both the trampoline and non-local goto bugs. He has included interesting ADA runtime stuff. This will take me some time to study. I will report the results.
Regards,
Adriaan van Os
Frank Heckenbach wrote:
Adriaan van Os wrote:
Apparently there are bugs with nonlocal gotos (this also happens on Linux/S390) and trampolines (I've seen this reported on Solaris, but I think only with earlier GCC versions).
The Ada for Mac OS X project has a trampoline patch to libgcc.a. It fixes 12 out of 66 testsuite failures. I will post the source code of the patch, as soon as I have it.
OK, that's one bunch. I hope it gets integrated into GCC soon.
Leaves the nonlocal goto bug ...
Andrew Reynolds from the ADA for Mac OS X team has been so kind to send me this morning patches for both the trampoline and non-local goto bugs. He has included interesting ADA runtime stuff. This will take me some time to study. I will report the results.
I applied the patches to the gcc-3.2.1 backend. They fix the trampoline failures plus some of the nonlocal goto crashes (goto4.pas, math.pas and nonlocgoto.pas). Some of the goto crashes remain (fjf558m.pas, fjf558n.pas, fjf582.pas, fproc.pas, goto5.pas, nlgpp.pas, nlgpp2.pas).
Regards,
Adriaan van Os
Adriaan van Os wrote:
I applied the patches to the gcc-3.2.1 backend. They fix the trampoline failures plus some of the nonlocal goto crashes (goto4.pas, math.pas and nonlocgoto.pas).
These do `goto's into the main program which internally are done via the `longjmp' mechanism (which is a standard C function, and I'm a bit surprised it didn't work before).
Some of the goto crashes remain (fjf558m.pas, fjf558n.pas, fjf582.pas, fproc.pas, goto5.pas, nlgpp.pas, nlgpp2.pas).
Those do actual nonlocal `goto's in the backend sense which still don't seem to work. :-(
Frank
-
Adriaan van Os -
Frank Heckenbach