Grx October 2000

grx@gnu.de

4 participants
5 discussions

Beginners-Question, Pascal and GRX
by Eike Lange 27 Oct '00

27 Oct '00

Hi! I got grx-2.3.1 installed. I tested the C-programms and everything was fine. Then, I tried to do the same with the Pascal-Programms: gpc --automake -L/usr/X11R6/lib -L/usr/lib -lX11 -ltiff -ljpeg -lgrx taste.pas (or whatever libs I try to link. I also used different versions of gpc. Debian Linux 2.2, 586-PC) I get (more than) the following errors: 8< ------------------- snip ------------ grx20.pas:252: warning: identifiers should not start with an underscore grx20.pas:252: warning: identifiers should not contain two adjacent underscores grx20.pas:252: warning: identifiers should not end with an underscore grx20.pas:252: type name expected, identifier '__asmname__' given grx20.pas:252: parse error before ;' ......... grx20.pas:622: type name expected, identifier Grfont' given grx20.pas:622: warning: type defaults to 'int' in declaration of 'Font' grx20.pas:1320: parse error before 'integer' gpc1: gpc exited with status 1 ------------------- snap ------------>8 In grx20.pas I did not find a library-decalaration like {$L grx}. Do I have to put it in my source? Could you please help me? Eike

2 4

RE: [Fwd: Re: GRX and CT touch screen mouse.]
by Mohamed Aly 11 Oct '00

11 Oct '00

I tried this but it didn't help. Now that GRX has failed with a regular serial mouse too on this machine, it seems the problem is related to the graphics adapter not the mouse driver. The machine has a PC-580 Pentium Little Board, that's PC/AT comaptible. The manual says it has VGA support (with Chips & Technologies 65555 HiQVideoTM Accelerator). I tried modetest, and successfully got 800X600 mode. I do get this mode with my GRX program too, but only when the mouse driver is not loaded. Mohamed Aly escribió: > I am testing a small DJGPP/GRX program that initializes graphics and draws a > line. > The program works fine, except when I load the Carroll Touch > (carrolltouch.com) > touch screen drivers ( tapi.exe, ctkern.exe, ctmouse.exe) The touch screen > mouse works fine alone too. > > But GRX fails in GrSetMode( ) when the driver is loaded, and the computer > hangs. > The mouse driver uses COM 2 - S/W Int 55h, 56h - H/W Int 7 - I/O address > 300. > > Does any one know of a conflict or what might be in conflict with the GRX? > I don't know, but it can be that the mouse driver is confussed if you set a video mode other than the standard vga, try to set GRX20DRV with "stdvga" and call GrSetMode with GR_default_graphics.

1 0

[Fwd: Re: GRX and CT touch screen mouse.]
by Mariano Alvarez Fernandez 10 Oct '00

10 Oct '00

-------- Original Message -------- Asunto: Re: GRX and CT touch screen mouse. Fecha: Mon, 09 Oct 2000 23:00:53 +0200 De: Mariano Alvarez Fernandez <malfer(a)teleline.es> A: Mohamed Aly <Mohamed.Aly(a)pason.com> Referencias: <B3A513228AFED3118D810050DABE0260181AB4(a)columbus.int.ca.pason.com> Mohamed Aly escribió: > I am testing a small DJGPP/GRX program that initializes graphics and draws a > line. > The program works fine, except when I load the Carroll Touch > (carrolltouch.com) > touch screen drivers ( tapi.exe, ctkern.exe, ctmouse.exe) The touch screen > mouse works fine alone too. > > But GRX fails in GrSetMode( ) when the driver is loaded, and the computer > hangs. > The mouse driver uses COM 2 - S/W Int 55h, 56h - H/W Int 7 - I/O address > 300. > > Does any one know of a conflict or what might be in conflict with the GRX? > I don't know, but it can be that the mouse driver is confussed if you set a video mode other than the standard vga, try to set GRX20DRV with "stdvga" and call GrSetMode with GR_default_graphics.

1 0

GRX and CT touch screen mouse.
by Mohamed Aly 08 Oct '00

08 Oct '00

I am testing a small DJGPP/GRX program that initializes graphics and draws a line. The program works fine, except when I load the Carroll Touch (carrolltouch.com) touch screen drivers ( tapi.exe, ctkern.exe, ctmouse.exe) The touch screen mouse works fine alone too. But GRX fails in GrSetMode( ) when the driver is loaded, and the computer hangs. The mouse driver uses COM 2 - S/W Int 55h, 56h - H/W Int 7 - I/O address 300. Does any one know of a conflict or what might be in conflict with the GRX? Mohamed Aly Systems Analyst Pason Systems Corp. Calgary, Canada

1 0

Download area temporarily moved
by Peter Gerwinski 05 Oct '00

05 Oct '00

Hello, due to something which is either a misconfigured WWW client or a denial-of-service attack I have temporarily moved the GRX download area from (old) http://www.gnu.de/software/GRX/download/ to (new, _without_ links pointing to it) http://www.gnu.de/software/GRX/DOWNLOAD/ I hope that it will be possible to switch it back soon. Greetings, Peter -- http://home.pages.de/~Peter.Gerwinski/ - G-N-U GmbH: http://www.g-n-u.de Maintainer GNU Pascal - http://home.pages.de/~GNU-Pascal/ - gpc-20001004 GnuPG key fingerprint: 9E7C 0FC4 8A62 5536 1730 A932 9834 65DB 2143 9422 keys: http://www.gerwinski.de/pubkeys/ - AntiSpam: http://spam.abuse.net

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

Grx October 2000